ZrO² PowerTools
cutting parameters
Zirconium oxid / Chrom-Cobalt / Wax, PMMA / Hybrid
Ceramic
The figures are recommended values.
Zirconium oxid
| roughing | |||
| Ø diameter |
2,5mm / 2,0mm |
||
| cutting z | 0,45mm | ||
|
spindle speed |
|
||
|
feed rate |
1800mm / min | ||
| finishing | |||
| Ø diameter | 1,0 mm / 0,6 mm | ||
| spindle speed |
25.000 U / min. 27.000 U/ min. |
||
| feed rate | 1800mm / min |
Titanium / Chrom-Cobalt
| roughing | |
| Ø diameter | 2,5mm / 2,0mm |
| cutting z | 0,15mm |
| spindle speed | 25.000 U / min. |
| feed rate | 1600 mm / min |
| finishing | |
| Ø diameter | 1,0mm / 0,6mm |
| spindle speed | 27.000 U / min. |
| feed rate | 1600 mm / min |
PMMA / Wax
| roughing | |
| Ø diameter | 2,0mm |
| cutting z | 0,5mm |
| spindle speed | 17.000 U / min. |
| feed rate | 1500 mm / min |
| finishing | |
| Ø diameter | 1,0mm |
| spindle speed | 20.000 U / min. |
| feed rate | 1500 mm / min |
Hybrid Ceramic
| roughing | |
| Ø diameter | 2,5mm |
| cutting z | 0,15mm |
| spindle speed | 50.000 U / min. |
| feed rate | 1200 mm / min |
| finishing | |
| Ø diameter | 1,0mm |
| spindle speed | 45.000 U / min. |
| feed rate | 1200 mm / min |