• milling burs for hard materials like Titanium and CoCr.
  • We offer this exclusive burs for most dental milling systems.
  • Tested on pre milled Abutments and Bars.
  • Titanium Grade 5 tested

 

 


 

cutting parameters for example:  
diameter: 2,0mm
cutting Z: 0,15mm
spindle speed: 25.000RPM
feed rate: 25mm/sec

 

<< SELECT SHANK SIZE IN LEFT NAVIGATION<<

 

Attention:

cutting tools may shutter, eye protection must be worn!

Use at own risk!